Optical
- Luminous transmittance · 3 mm
- ≥93%
- Haze · 3 mm
- 0.3%
- Refractive index
- 1.49
High-flow injection grade PMMA
V6
High-flow injection-grade PMMA for thin-wall and long-flow parts.
V6 is the high-flow V Series profile with an MFR of 14.0, intended for applications where cavity filling and longer flow paths are central to the injection-molding review.
V6 property profile
Compare V6 across four performance areas.
Review the optical, rheological, thermal and mechanical profile below. Request the current V6 TDS when you need complete data and test methods.
Rheological
- MFR · 230°C / 3.8 kg
- 14.0 g/10 min
Thermal
- Vicat softening temperature
- 89°C
- Heat deflection temperature
- 84°C
Mechanical
- Tensile strength
- 66 MPa
- Notched Izod impact strength
- 1.3 kJ/m²
- Unnotched Izod impact strength
- 18 kJ/m²
Applications
Applications for high-flow injection PMMA.
V6 provides higher flow for thin-wall components and parts with longer or more demanding flow paths.
Thin-wall components
Parts with reduced wall thickness and higher melt-flow requirements.
Display light guides
Transparent molded display components with longer or more demanding flow paths.
Cosmetic packaging
Clear molded packaging parts reviewed for flow, appearance and end-use requirements.
V2 or V6?
Select by heat resistance and melt flow.
Use V6 when filling behavior is the main challenge. Use V2 as the first comparison when a higher Vicat value is required.
Need more flow for your molded part?
Share the current grade, wall thickness and flow length. We’ll help you assess whether V6 is the better starting point.