V1Extrusion
Extrusion Grade PMMA
Low-flow PMMA for acrylic sheet, light-guide and diffuser panels, tubes, rods and clear profiles.
1.8MFR · g/10 min
102°CVicat
≥93%Transmittance
0.3%Haze
V Series PMMA grades
Select a grade by processing method and flow.
V1 is intended for extrusion. V2 and V6 cover general and high-flow injection molding. Compare MFR, heat resistance and part geometry before running a material trial.
V2Injection
Injection Grade PMMA
General-purpose injection PMMA with the highest Vicat profile in the current V Series.
2.0MFR · g/10 min
107°CVicat
≥93%Transmittance
0.3%Haze
V6High flow
High-Flow Injection PMMA
High-flow injection PMMA for thinner walls, longer flow paths, packaging and display components.
14.0MFR · g/10 min
89°CVicat
≥93%Transmittance
0.3%Haze
All grades · at 3 mm: ≥93% transmittance · 0.3% haze. MFR: 230°C / 3.8 kg.
Full grade comparison
| Grade | Process | MFR 230°C / 3.8 kg | Vicat | HDT | Optical data 3 mm | Applications |
|---|---|---|---|---|---|---|
| V1 | Extrusion | 1.8 g/10 min | 102°C | 94°C | ≥93% / 0.3% haze | Sheet, light-guide panels, tubes, rods, profiles |
| V2 | Injection molding | 2.0 g/10 min | 107°C | 101°C | ≥93% / 0.3% haze | Luminaire covers, display and technical parts |
| V6 | High-flow injection | 14.0 g/10 min | 89°C | 84°C | ≥93% / 0.3% haze | Thin-wall, long-flow, packaging and display parts |
Applications
PMMA grades for extrusion and injection molding.
Review common applications by processing method, then compare the relevant grade before a production-line or mold trial.
V1 · Extrusion
Extrusion Applications
Acrylic sheet, optical and light-guide panels, diffuser sheets, tubes, rods and clear profiles.
Explore extrusion applications → V2 / V6 · InjectionInjection Applications
Luminaire covers, display parts, transparent technical parts, cosmetic packaging and thin-wall components.
Explore injection applications →
Manufacturing
PMMA resin manufactured at our Zhuhai production base.
XINTAO has worked with acrylic materials for more than two decades. V Series resin is produced in Zhuhai through continuous bulk polymerisation, with a designed annual PMMA resin capacity of up to 150,000 tonnes.
- 01Manufacturing base
Produced in Zhuhai, Guangdong, with a designed annual resin capacity of up to 150,000 tonnes.
- 02Material review
Current TDS and MSDS documents are available on request before customer-side trials.
- 03Export packing
Available in 25 kg bags or 700 kg jumbo bags, with palletized options for export handling.
01MMA monomerStorage and blending
02PolymerisationMulti-stage continuous process
03DevolatilisationMMA recovery and refining
04PelletisingMelt extrusion and cutting
05Final handlingDrying, sieving and packing
Manufacturing evidence
Facility, process control and export handling.
See the Zhuhai site across production, equipment inspection, laboratory testing, packing and dispatch.
Factory film
From PMMA production to shipment.
The factory film covers the Zhuhai site, production equipment, automated packing, material testing and shipment handling.
Technical resources
The documents you need for material evaluation.
Request the current TDS, MSDS, compliance reports or shipment documents for the grade and stage of your project.
Product dataTDS
Physical and processing properties for V1, V2 and V6.
SafetyMSDS
Material identification, handling, storage and safety information.
ComplianceSGS reports
Selected RoHS, REACH SVHC and POPs reports available on request.
ShipmentCOA
Certificate of analysis supplied with each shipment.
Grade selection support
Find the right starting grade for your process.
Compare V1, V2 and V6 around your process, part geometry and performance priorities before a production trial.
01Current material
Use the supplier, grade or target MFR as a comparison point.
02Processing method
Start with extrusion or injection molding, then add thickness and flow length.
03Part and end use
Describe the part, its geometry and where it will be used.
04Performance priorities
Optical clarity, heat resistance, flow or another critical requirement.
Frequently asked questions
Grade selection, samples and supply.
Key information for evaluating XINTAO PMMA resin and planning a material trial.
How do I choose between V1, V2 and V6?
Choose by process first. V1 is the extrusion grade. V2 is the general-purpose injection grade and has the highest Vicat profile in the current V Series. V6 is the high-flow injection grade for thinner walls and longer flow paths.
Do all three grades have the same optical values?
V1, V2 and V6 have luminous transmittance ≥93% and haze 0.3% at 3 mm.
Can I request material for testing?
Yes. One 25 kg evaluation sample can be provided free of charge, subject to availability. International freight is collected through the recipient’s courier account.
What is the minimum order quantity?
The standard minimum order is one metric tonne per grade. Different grades may share a container when each grade meets its own minimum order quantity.
What packing options are available?
Standard packing is 25 kg bags or 700 kg jumbo bags. Palletised export packing can be discussed according to the shipment plan.
Which technical and compliance documents can be provided?
Current TDS, MSDS, and selected SGS RoHS, REACH SVHC and POPs reports are available on request for material review. A certificate of analysis is supplied with each shipment.
How should PMMA resin be stored?
Keep the material sealed in its original packaging in a cool, dry and ventilated place. Protect it from direct sunlight, moisture and heat sources.
Start with your process and part.
Share the current grade and critical requirements. We’ll help you compare V1, V2 and V6 and identify the next step.